This adapter allows the installation of the VW TDI engine into a 4L Jeep. It uses the stock 4L flywheel and includes a high torque mini starter.
Our Jeep XJ conversion using this adapter can be seen here.
This adapter can be used in jeep TJ, YJ, XJ and other 4L Jeep vehicles to install the VW TDI engines giving improved fuel economy and amazing power.
The adapters are not transmission specific, they make the back of the TDI "look" like the back of the engine that the TDI is replacing. The adapters can be used with automatic or standard transmissions 2WD or 4WD.
Confirm your transmission bellhousing pattern here: jeep-4l-part2
Confirm your flywheel bolt pattern here: jeep-4l-hub
This adapter allows the installation of the VW TDI engine into a 3.8L Jeep. It uses the Stock 3.8L Flywheel or Flexplate and includes a high torque mini starter.
The adapters are not transmission specific, they make the back of the TDI "look" like the back of the engine that the TDI is replacing. The adapters can be used with automatic or standard transmissions. 2WD or 4WD.
The adapters are not transmission specific, they make the back of the TDI "look" like the back of the engine that the TDI is replacing.
The adapters can be used with automatic or standard transmissions. 2WD or 4WD.
Our Jeep XJ motor mount utilize the stock Jeep mount location. These mounts are designed to work with the ALH and newer 1.9L / 2L TDI with the thickness of our TDI adapters. The frame mount holes are slotted 2" to allow you to position the engine farther forward for firewall clearance on the Vacuum pump.
Kit includes: (2) TDI Engine Mounts, (2) Cherokee Frame Mounts (2) Polyurethane Motor Mounts (1) Installation Hardware.
These mounts ship unwelded as the mounting angle of the engine differs from model to model.
$315 CAD
This Jeep XJ Hydraulic motor mount kit utilize the stock Jeep XJ mount location. These mounts are designed to work with the ALH and newer 1.9L / 2L TDI with the thickness of our TDI adapters. The frame mount holes are slotted 2" to allow you to position the engine farther forward for firewall clearance on the Vacuum pump. This kit utilizes a hydraulic engine mount that greatly reduces engine vibration to the chassis.
** You must have at least a 3" suspension lift to clear these mounts**
If you don't have the required lift then you want the standard XJ mount kit.
Kit includes: (1) TDC 207 Universal engine mount kit (2) Cherokee Frame Mounts (2) Hydraulic Motor Mounts (1) Installation Hardware.
These mounts ship unwelded as the mounting angle of the engine differs from model to model.
$329 CAD
Our Jeep flywheels are manufacture from high quality billet steel. This High Inertia billet steel flywheel helps the engine maintain RPM's in rough terrain.
These flywheels are CAD/CAM-designed and CNC-machined from billet steel for precise, no-hassle, bolt-in installation and are SFI-certified, so you know that you can count on them.
This billet aluminum housing has provisions for main oil out and return (ORB-6 threads) as well as turbo line in the stock location along with oil pressure sender and a second oil pressure hole for accessory use.
Fits VW TDI model BEW, BHW and ALH engines and possibly other VW engines.
$219.00 CAD
This 1.9L TDI water outlet fitting in the same depth as the tandem pump and just has the rad, heater and temp sender outlets.
Very compact when fighting firewall clearance in a TDI conversion.
$49.00 CAD
This kit includes both left and right engine mount parts.
Just weld them up at the angle you need.
It has the correct spacing to align with holes in the ALH and newer 1.9L and 2L TDI . These are the same parts that we use to build our custom mounts.
$125.00 CAD
Accessory drive relocation plate with idler, belt and hardware.
This kit allows the accessory drive bracket on BEW engines to be moved up 6" for added clearance on the A/C compressor and Power Steering pump.
It puts the top of alternator slightly below the top of the intake manifold.
Some modification of the stock accessory bracket is required.
Only works with BEW code engines, not ALH.
$459.00 CAD
This kit includes the parts to build the frame side of your custom mounts.
It includes the 1/4" steel plates with 1/4" steel gussets. From the frame side to the outer edge is 4" and they are about 3.5" wide.
Also included are the Polyurethane mounts and hardware.
$159.00 CAD
This kit includes the parts to build the frame side of your custom mounts.
It includes the 1/4" steel plates with 1/4" steel gussets and the hydraulic mounts. From the frame side to the outer edge of the fluid mount is 4 3/8", they are about 5" wide and about 3 1/4" tall.
These hydraulic mounts offer much more vibration control than the polyurethane mounts in the TDC 216 mount kit but take up much more space.
$159.00 CAD